If you’re wondering, “Will a 120/70/12 motorcycle t-ream handle the same as a 130/70?” you’ve come to the right place. Read on to discover why you should be more concerned with the aspect ratio than the size. The aspect ratio refers to the proportion of the tire’s width to its height. The 130/70 mark, for example, means the tyre is 130mm wide by 0.7mm tall.
You can find out the DOT number of your motorcycle tyre by looking at the sidewall. This 4-digit code is usually associated with the letters DOT, and the first two digits indicate the week and year of manufacture. For example, DOT 1414 means that the tyre was made in the 14th week of 2014 and the last two digits indicate the year. The manufacturer guarantees its tire‘s properties for five years, but you may want to check the code visually.
If you are unsure about the DOT number of your 120/70/12 motorcycle tyre, read the service description on the sidewall. These descriptions will indicate what the tire is designed to do. In some cases, you can find a special version of the same motorcycle tyre by specifying the DOT number of the original tire. This special version is usually made at the motorcycle manufacturer’s request. The “B” service description means that the tyre has extra sidewall stiffeners.
The DOT number on a 120/70/12 motorcycle tyre is an important part of the tyre. If you are concerned about your safety, you need to make sure that you are using a DOT-approved tire. These motorcycle tyres are the same size as standard motorcycle tires. In case you’re unsure, you can search for these numbers online.
After you’ve determined the DOT number, the next step is to determine what size you need. The width is equal to the diameter of the rim. The width of the tyre is also determined by the DOT number. If you’re not sure what size you need, you can refer to a street tire conversion chart. This chart will provide you with all the sizes in between.
The width of a 120/70/12 motorcycle tire is the nominal width of the tyre, measured from sidewall to sidewall. The actual physical width of a tyre may differ from the nominal width, and this difference is measured as the aspect ratio. This is the ratio of height to width expressed in percentage. The aspect ratio is important for choosing the correct motorcycle tyre for your needs, and it can be found on the sidewall of your bike.
The size of a motorcycle tyre is defined by the aspect ratio and speed rating. The width of the tire is measured in millimeters. The other two numbers refer to the rim size in inches. The aspect ratio of these tires is 100%. In order to make sure that your tyre matches your rim size, you need to refer to the manufacturer’s website.
The DOT code of a 120/70/12 motorcycle a tyre tells you the width of the rim. A 120/70/12 motorcycle tyre is the same width as a 190/80/12 bike tyre. The DOT code is four characters long and indicates that the tyre was made in the 42nd week of 2009.
The “R” in the tire size stands for radial and diagonal construction. A 120/70/12 motorcycle tyre is narrower in the front than the rear. The difference in the two dimensions is very important in motorcycle performance. A narrower tire is better for quick cornering. However, a wider tyre requires more lean angle to achieve a given rate of cornering.
The Load rating of a 120/ 70/12 motorcycle tyre is a critical number to know before purchasing a new tire. It is important because the maximum weight a motorcycle tyre can support is approximately 1,700 kg. To understand the load rating, we first need to look at the size of the motorcycle tyre. This measurement is often expressed in millimeters.
A typical tire size chart will show a speed rating and load rating. The letter H represents the maximum speed the motorcycle tyre is capable of holding. In this example, the tyre is designed for 130mph top speed. Similarly, a speed chart will show an L or speed category symbol. A speed category symbol indicates the maximum speed that a motorcycle tyre can hold.
A motorcycle tyre’s load rating is usually indicated as the tyre’s maximum load. It is found next to the tyre’s inflation pressure. This metric is commonly found on motorcycle tyres and is used to determine the maximum weight of a motorcycle tyre. While there are many advantages to ensuring the tyre is correctly inflated, the main advantage of riding with the right pressure is safety. It also prevents premature tire wear.
Tread is the visible part of a motorcycle tyre. Tread design is what gives a tyre grip and cushioning. Many tyre performance features are based on tread design, including different compounds for the shoulder and centre. A 120/70/12 motorcycle tyre has a tread pattern of 12 mm in the center and 12 mm in the shoulder.
Alternatives to a 120/70/12 tyre
If you’re not familiar with the terms, the first number represents the width of the motorcycle tyre, while the second letter is the rim diameter. The width is measured across the tread from the furthest point on one sidewall to the opposite. However, you may not know the exact measurement of a bike tyre, so it is important to ask a Tech Service representative. Listed below are some alternative sizes to a 120/70/12 motorcycle tyre.
You can try out different tyres before you purchase them. Mitas Motorcycle Tyres, for example, offer a wide variety of sizes. Many of their products have comprehensive customer reviews. Buying online is convenient, but it can be difficult to try a bike tyre before buying it. Thankfully, SportsBikeShop’s return policy means that you can always get a refund, even if it’s not the one you’re looking for.
When choosing a motorcycle tyre, you should know the load your bike can carry and the style of riding you’ll be doing. Cheap motorcycle tyres may not have enough grip to sustain high speeds and carry a heavy load. However, the right choice can mean the difference between a long life and a shorter one. You can also consider the 80/100/17 motorcycle tyre, which is great for the road and is suitable for adventure riding.